This position is located in the Deputy Commandant for Mission Support; Assistant Commandant for Engineering and Logistics (CG-4), Office of Naval Engineering (CG-45), Offshore Patrol Cutter Design Management Division (CG-450), Washington, DC.
Learn more about this agency
You will serve as a Senior Controls and Communications Engineer overseeing technical aspects of the acquisition of multiple classes of ships and boats, which represents multi-billion dollar programs in acquisition and life cycle costs over the lifetime of an acquisition.
Being a CG civilian makes you a valuable member of the CG team. Typical work assignments include:
- Serving as a technical expert in shipboard digital data control networks and equipment such as computer interfaces, instrumentation and controls.
- Serving as an expert on broad projects and programs with national impact in the shipboard digital data control networks and equipment such as computer interfaces, instrumentation and controls specialty area.
- Planning and coordinating technically complex project related work in unexplored areas where there is little or no theory, so new techniques and approaches are needed.
- Leading the development of Statements of Work, market and trade studies, performance specifications, technical evaluations, surface tests and evaluations, for all items related to marine electronics engineering.
- Identifying new technologies and integrating these technologies into cutter designs.
- Managing electronic engineering portions of major new construction and/or renovation projects and incorporating best design practices into all phases of design and construction.
Occasional travel – This position requires occasional travel.
Conditions of Employment
- U.S. Citizenship is required to apply for this position.
- Males born after 12/31/1959 must be registered for Selective Service.
- A one year probationary period may be required.
- Unofficial Transcripts must be submitted at the time of application.
All qualification requirements must be met by the closing date of the announcement.
Degree: professional engineering. To be acceptable, the curriculum must: (1) be in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
Combination of education and experience — college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
- Professional registration — Current registration as a professional engineer by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
- Written Test — Evidence of having successfully passed the Engineer-in-Training (EIT) examination, or the written test required for professional registration, which is administered by the Boards of Engineering Examiners in the various States, the District of Columbia, Guam, and Puerto Rico.
Applicants who have passed the EIT examination and have completed all the requirements for either (a) a bachelor's degree in engineering technology (BET) from an accredited college of university that included 60 semester hours of courses in the physical, mathematical, and engineering sciences, or (b) a BET from a program accredited by the Accreditation Board for Engineering and Technology (ABET) may be rated eligible for certain engineering positions at GS-5. Eligibility is limited to positions that are within or closely related to the specialty field of the engineering technology program. Applicants for positions that involve highly technical research, development, or similar functions requiring an advanced level of competence in basic science must meet the basic requirements in paragraph A. Because of the diversity in kind and quality of BET programs, graduates of other BET programs are required to complete at least 1 year of additional education or highly technical work experience of such nature as to provide reasonable assurance of the possession of the knowledge, skills, and abilities required for professional engineering competence. The adequacy of this background must be demonstrated by passing the EIT examination.
- Specified academic courses — Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum as described in paragraph A.
- Related curriculum — Successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)
In addition to basic requirement above: Applicants must have at least one year of specialized experience equivalent to the GS-13 level in the Federal service. Specialized experience is experience that has equipped you with the particular knowledge, skills, and ability to successfully perform the duties of this position and is typically in or related to this line work.
National Service Experience (i.e., volunteer experience): Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
This position has a positive education requirement. If you are including education on your resume, report only attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education. See Required Documents section for detail.
FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet Federal qualification requirements if you can show that your foreign education is comparable to education received in accredited educational institutions in the United States. It is your responsibility to provide such evidence with your application. See Recognition of Foreign Qualifications click here
Applicants will be required to complete questions contained on the Declaration for Federal Employment (OF-306) at the time a tentative job offer is made. Certain responses on the form could pose a problem with suitability for employment determinations. If you receive a conditional offer of employment for this position, you will be required to complete/make updates to the OF-306 and to sign and certify the accuracy of all information in your application, prior to entry on duty. False statements on any part of the application may result in withdrawal of offer of employment, dismissal after beginning work, or imprisonment.
DHS uses e-Verify, an Internet-based system, to confirm the eligibility of all newly hired employees to work in the United States. Learn more about e-Verify, including your rights and responsibilities at click here
Recruitment incentives may be authorized.
This is a term appointment not to exceed 4 years.
This vacancy has an initial cut-off date of 01/31/2020.
All Federal employees are required to have Federal salary payments made by direct deposit.
The Department of Homeland Security encourages persons with disabilities to apply, to include persons with intellectual, severe physical or psychiatric disabilities, as defined by 5 CFR § 213.3102(u), and/or Disabled Veterans with a compensable service-connected disability of 30 percent or more as defined by 5 CFR § 315.707. Veterans , Peace Corps / VISTA volunteers , and persons with disabilities possess a wealth of unique talents, experiences, and competencies that can be invaluable to the DHS mission. If you are a member of one of these groups, you may not have to compete with the public for federal jobs. To determine your eligibility for non-competitive appointment and to understand the required documentation, click on the links above or contact the Servicing Human Resources Office listed at the bottom of this announcement.
More than 1 selection may be made from this announcement if additional identical vacancies in the same title, series, grade, and unit occur within 45 days from the date the certificate was issued.
If you need a reasonable accommodation for the application and hiring process, please contact 202-795-6272. Decisions on granting reasonable accommodation will be made on a case-by-case basis. Visit Reasonable Accommodation
How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
We will review your résumé and supporting documentation to ensure you meet the basic qualification requirements. If you meet the minimum qualifications, your experience, education and training will be rated using the on-line assessment to place you in one of three categories.
The necessary Knowledge, Skills, and Abilities to perform this job are:
If you meet the minimum qualifications, you will be placed in one of the following categories:
1. Best-Qualified: Applicants possessing experience that substantially exceeds the minimum qualifications of the position and demonstrate high proficiency in all of the critical competencies, including all Selective Placement Factors (SPF) and appropriate Quality Ranking Factors (QRF) as determined by the job analysis.
2. Well-Qualified: Applicants possessing experience that exceeds the minimum qualifications of the position and demonstrates acceptable proficiency in all of the critical competencies, including all SPFs and appropriate QRFs as determined by the job analysis.
3. Qualified: Applicants possessing experience that meets the minimum qualifications of the position and demonstrate basic proficiency in most of the critical competencies, including all SPFs and appropriate QRFs as determined by the job analysis.
If you are best qualified, you may be referred to the hiring manager for consideration and may be called for an interview. Your resume and responses to the self-assessment questions are an integral part of the process for determining your qualifications for the position. Therefore, you must support your responses to the self-assessment questions by providing examples of past and present experience in your resume.
Veterans with 5-point preference who meet the eligibility and qualification requirements are placed above non-preference eligibles within the category in which they are qualified. Veterans who have a compensable service-connected disability of at least 10% are listed in the best qualified category, except when the position being filled is scientific or professional at the GS-09 grade level or higher. For information on veterans' preference, click here.
To preview questions please click here .
Background checks and security clearance
Drug test required
Position sensitivity and risk
Noncritical-Sensitive (NCS)/Moderate Risk
Trust determination process
1. Your resume
2. If you are claiming special priority selection rights under the Interagency Career Transition Assistance Program (ICTAP), submit a copy of your agency notice, most recent performance rating and most recent SF-50, Notification of Personnel Action, noting your current position, grade level and duty location. If you have never worked for the federal government, you are not ICTAP eligible. To be considered eligible, you must be placed in the well-qualified category for this position. Please see ICTAP eligibility.
3. OPM must authorize employment offers for former or current Political Appointees. If you are currently, or have been within the last 5 years, a political Schedule A, Schedule C or Non-Career SES employee in the Executive Branch, you must disclose this information. Submit proof of your former or current status, such as your SF-50. Please see here.
All documentation as outlined above must be received by the closing date of the announcement. If you are unable to submit your documents electronically, you may fax or mail the documents. A fax cover sheet will be provided to you from the system, with fax number and instructions to transmit the requested documents. The required documents will also be accepted by mail and must be received by the closing date of the announcement. The mailing address is COMMANDANT, ATTN OFFICE OF CIVILIAN HUMAN RESOURCES (JOBS), US COAST GUARD, 2703 MARTIN LUTHER KING JR AVE SE STOP 7912, WASHINGTON, DC 20593-7912.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education .
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
To apply for this job email your details to firstname.lastname@example.org