Overview

 

 

At the end of April 2019, WorleyParsons combined with Jacobs Energy, Chemicals and Resources (ECR) division, to create Worley.Together, we are a leading global provider of professional project and asset services in the energy, chemicals and resources sectors. We have almost 60,000 amazing people in around 60 countries across the world covering the full lifecycle, from creating new assets to sustaining and enhancing operating assets for our customers.

 

 

Our exciting combination will create new opportunities for you to join us. The transition will take time, so in the short-term you may see references to our heritage companies in your application process.

 

 QC Inspector is responsible for ensuring quality standards are maintained in the execution of Operations and Maintenance activities.  

     

  • Ensures compliance with the companys Quality Control Manual and the clients specifications.
  •  

  • Interpret and inspect to engineered drawings.
  •  

  • Implements the proper quality control procedures. 
  •  

  • Performs and documents mechanical inspections including welding, tank/vessel repair and alteration, and bolt-up activities.
  •  

  • Ensures all turnover is correct and complete. 
  •  

  • Monitors on consumable controls, document control and turnover and material handling.
  •  

  • Produce accurate, clear and understandable daily inspection and test reports
  •  

  • Interface with Client representatives

 Knowledge, Skills & Abilities: 

     

  • Must possess adequate knowledge of specifications, codes and standards to perform the above duties.
  •  

  • Routinely performs safety and productivity observations; shop and field inspections; and is required to attend various components of technical, developmental and safety training.
  •  

  • Must demonstrate support for the companys environmental management system objectives.
  •  

  • Strong administrative abilities, including organizational skills.
  •  

  • Ability to prioritize assignments and handle multiple ongoing tasks concurrently.

  Must have a working knowledge of the inspection requirements and daily activities for the following disciplines:  Develop and maintain Quality Control Documentation, this includes: 

     

  • Weld mark, NDE and Bolt up documentation
  •  

  • Vessel Repair & Alterations
  •  

  • Hydrotest Records
  •  

  • Post weld heat treatment records
  •  

  • Civil and coating records
  •  

  • Redline Drawings
  •  

  • Turnover completed documents/redlines

 Inspection of welding activities, this includes: 

     

  • Qualify welders
  •  

  • Quality welding procedures
  •  

  • Materials and consumables
  •  

  • Fit up, preheat and inter pass temperatures
  •  

  • Adherence to welding parameters
  •  

  • Final walkdown inspection

  Bolt up inspection, this includes:  

     

  • Correct gaskets, bolts and nuts
  •  

  • Flange alignment
  •  

  • Correct torque procedures

  Hydrotest inspection, this includes: 

     

  • Type and duration of test
  •  

  • Required test instrumentation
  •  

  • Test media, and disposal of same
  •  

  • Cleaning and drying procedures

  Painting and coating inspection, this includes: 

     

  • Blast profile and surface preparation
  •  

  • Environmental conditions
  •  

  • Consumable inspections
  •  

  • Application techniques
  •  

  • Dry film thickness inspection
  •  

  • Holiday testing

  Post weld heat treatment, this includes: 

     

  • PWHT thickness requirements
  •  

  • Time and temperature ranges
  •  

  • Setup and operation of equipment
  •  

  • Documentation

 

Physical Demand/Work Environment:

 

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the essential functions of this job, the employee is required to:

 

– Must have ability to stand, walk on level, uneven and slippery surfaces, sit, squat, kneel, reach through low and high ranges and exhibit normal balance and coordination. These basic physical requirements are essential for safe performance of the job in harsh environments with exposure to very cold temperatures and while wearing arctic gear

 

 

– Lift 50 lbs from floor to waist level x 2 with a 12 second interval

 

– Lift 43 lbs from floor to shoulder level x 2 with a 12 second interval

 

 

– Lift 28 lbs from floor to crown/overhead level x 2 with a 12 second interval

 

 

– Carry 50 lbs with two hands for a minimum distance of 30 feet x 2 allow a 60 second rest period between repetitions

 

– Stairs: Walk up and down 20 steps x 5 repetitions for a total of 100 steps. Self-paced allow a 60 second rest break after walking up and down 50 steps.

 

 

– Climb Stairs and Carry: While carrying 30 lbs in one hand and holding onto a railing with the other hand for safety, walk up and down 20 steps x 3 for a total of 60 steps. Self-paced but continuous, allow a 60 second rest break after walking up

 

and down each set of 20 steps.

 

– Slanted Ladder: Climb up and down 30 rungs x 2 repetitions for a total of 60 rungs. Self-paced allow a 60 second rest period after a set of 30 rungs.

 

 

– Repetitive Stoop Test: Perform from standing position, bend forward at waist as far as possible without bending the knees with hands reaching toward the floor x 10, self-paced, but continuous.

 

 

– Repetitive Kneel Test: Perform from standing, kneel on one knee, alternate from left to right knee, x 10 each knee.

 

 

– Repetitive Squat Test: Perform a functional squat and stand x 10.

 

 

– Twist and Flex Test: Perform from standing alternate toe touches x 10 to each side to assess ability to twist and flex the trunk repetitively

 

  Current AWS QC-1, Certified Welding Inspector certificate  

  • Minimum five years of experience in construction with an emphasis on welding related activities
  •  

  • Certified Welding Inspector (CWI) is mandatory and may be substituted for 1 year of experience.  The combination of CWI certification and secondary education may not be substituted for more than 2 years experience.  NACE certification is not required but helpful when project includes painting or coating activities.  A basic (Level 1) understanding of Radiographic, Ultrasonic, Liquid Penetrant and Magnetic Particle inspection is required. 
  •  

  • Must have a minimum of high school Diploma (GED), secondary education is an asset but not required.
  •  

  • Valid drivers license is required and the ability to be insured by Worley
  •  

  • Ability to use computer equipment to input and maintain data, prepare reports and correspondence as required. Basic knowledge of computer operation. (Word, Excel)
  • Worley is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status or other characteristics protected by law. Worley is a drug-free workplace.

    Required Qualifications

    • None

    More Jobs: