<b>Duties</b><br /><br /><b>Summary</b><br /><br />You will serve as a Senior Designer in the Capital Improvement Business Line, Public Works Department of NAVAL FAC ENGINEERING CMD WASH.<br /> Learn more about this agency <br /><br /><b>Responsibilities</b><br /><br /><ul> <li>You will evaluate technical aspects of development and design work accomplished by the design division.</li> <li>You will work with team members to evaluate design options and risks covering multiple engineering disciplines.</li> <li>You will review work performed by subordinates for technical accuracy.</li> </ul> <br /><br /><b>Travel Required</b><br /><br />Occasional travel – You may be expected to travel for this position.<br /><br />Supervisory status <br /> Yes <br /><br />Promotion Potential <br /> 13 <br /><br /></li> <b>Requirements</b><br /><br /><b>Conditions of Employment</b><br /><br /><ul> <li>Must be a US Citizen.</li> <li>Must be determined suitable for federal employment.</li> <li>Must participate in the direct deposit pay program.</li> <li>New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit www.dhs.gov/E-Verify/.</li> <li>Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade level. This requirement is called time-in-grade. Time-in-grade requirements must be met by the closing date of this announcement.</li> <li>Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.</li> <li>You will be required to obtain and maintain a current valid United States driver?s license.</li> <li>You will be required to obtain and maintain an interim and/or final secret security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.</li> <li>This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). You must be certified as a Career Field Facilities Engineering Level III. Certification is required within 24 months of appointment.</li> <li>This position may require travel from normal duty station to CONUS.</li> <li>You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment.</li> </ul> <br /><br /><b>Qualifications</b><br /><br />In addition to the Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: 1) Supervising/leading multi-disciplined engineers, architects, and designers engaged in providing engineering and design services; 2)Planning, designing, and sketching overall solutions for architectural and engineering features of various complex and unusually difficult projects for preliminary as well as final design purpose; 3)Conducting architectural and/or engineering studies and investigations which form the basis for funding future projects; 4) Providing subject matter expert-level guidance and counsel to engineers, architects and designers on architectural and engineering methods and systems necessary to develop and coordinate projects for design, repair, alteration, rehabilitation, installation, improvement or demolition of installation facilities; and 5) Reviewing plans and designs prepared by both in-house and AE consultants for accuracy, adequacy and economy of design, choice of materials, completeness, practicability and safety as well as to determine conformance technical guidance, criteria and good construction practice. <strong>NOTE: This information must be supported in your resume to be considered for the position.</strong><br /><br />This position has a selective placement factor that will be used to screen out ineligible candidates. The selective placement factor is: This position requires the incumbent to be a registered Professional Engineer <strong>OR</strong> Professional Architect in the District of Columbia, Guam, Puerto Rico, or any State in the U.S. <strong>NOTE: You must submit a copy of your registration with your application to be considered for these positions.</strong><br /><br />Additional qualification information can be found from the following Office of Personnel Management website:<br /> https: www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=GS-PROF .<br /><br />https: www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/architecture-series-0808/ <br /><br />https: www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/general-engineering-series-0801/ <br /><br />Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. <br /><br /><b>Education</b><br /><br />Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Applicants must possess<br /><br /><strong>Applicants for the Professional Engineering Series must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: </strong><br /><br />Have successfully completed a bachelor's degree (or higher) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.<br /><br />OR<br /><br />Have a combination of college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: (I) Professional registration or licensure: Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration; or (II) Written Test: Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico; or (III) Specified academic courses: Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above); or (IV) Related curriculum: Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.<br /><br /><strong>Applicants for the Professional Architecture Series must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:</strong><br /><br />Successful completion of a bachelor's or higher degree in architecture.<br /><br />OR<br /><br />Successful completion of a bachelor's or higher degree in a field related to architecture that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems.<br /><br />OR<br /><br />Have a combination of college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The curriculum for a degree is in either architecture or architectural engineering and covers function, esthetics, site, structure, economics, mechanical-electrical, and other engineering problems related to the design and construction of buildings primarily (but not exclusively) intended to house human activities OR you lack a degree in architecture, but have 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture that demonstrates that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture. (Note – In the absence of college courses, 5 years of such experience is required). <br /><br /><b>Additional information</b><br /><br />This position is covered by the Department of Defense Priority Placement Program.<br /><br />Additional vacancies may be filled by this announcement.<br /><br />A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.<br /><br />If you are unable to apply online and request information about the Alternate Application process, please contact the Department of Navy's Employment Information Center.<br /><br />Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http: www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf <br /><br /><b>ICTAP Applicants: </b>To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating of 85 or higher. For more information about ICTAP eligibility please review the following link: https: www.usajobs.gov/Help/working-in-government/unique-hiring-paths/federal-employees/ictap/ <br /><br />This position is subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.<br /><br />Recruitment incentives may be authorized to eligible new hires.<br /><br />A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized.<br /><br />This position is eligible for part time, full time or ad-hoc telework at the discretion of management.<br /><br /><strong>Physical Demands</strong><br /><br />The work is mostly sedentary with occasional field trips. Field investigation may require climbing around construction sites and onto scaffolding. Occasionally, during visits, there may be walking, bending, climbing and stooping to observe work operations. Applicable safety requirements are to be met. <br /><br /><strong>Work Environment</strong><br /><br />Work is performed primarily in an office setting with occasional travel. There are occasional site visits, and exposures to conditions in buildings and facilities that are under construction. Percentage of travel is up to 15% of the time may be required to successfully execute the responsibilities of the position. <br /><br /><b>How You Will Be Evaluated</b><br /><br />You will be evaluated for this job based on how well you meet the qualifications above.<br /><br />In order to qualify for this position, your resume must provide sufficient experience and/or education, knowledge, skills, and abilities to perform the duties of the specific position for which you are being considered. Your resume is the key means we have for evaluating your skills, knowledge, and abilities as they relate to this position. Therefore, we encourage you to be clear and specific when describing your experience.<br /><br />When the application process is complete, we will review your resume to ensure you meet the hiring eligibility and qualification requirements listed in this announcement. You will be rated based on the information provided in your resume and responses to the Occupational Questionnaire, along with your supporting documentation to determine your ability to demonstrate the following competencies:<br /><br /><ul><li>DESIGN AND DEVELOPMENT</li><li>MANAGING HUMAN RESOURCES</li><li>PARTNERING</li></ul><br /><br />You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation.<br /><br />If after reviewing your resume and supporting documentation, a determination is made that you inflated your qualifications and/or experience, your score may be adjusted to more accurately reflect your abilities or you may be found ineligible/not qualified.<br /><br />Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment.<br /><br />All eligibility, qualifications, and time-in-grade requirements must be met by the closing date of this announcement. <br /><br /><b>Background checks and security clearance</b><br /><br />Security clearance <br /> Secret <br /><br />Drug test required <br /> No <br /><br /></li> <b>Required Documents</b><br /><br /><b>You are required to provide documentation that supports the eligibility and qualification claims made in your resume and assessment questionnaire.</b> You must submit the applicable documents listed here and those listed with the eligibilities you select in the announcement questionnaire with your application package. Applicants who do not provide supporting documentation that fully support their claims will not be referred to the hiring manager. Cover letter is optional.<br /><br /><b>A complete resume is required.</b> Your resume must show relevant experience, job title, duties and accomplishments. Your resume must show complete information for each job entry to support minimum qualifications. The following information should be provided in your resume, but it is acceptable to provide elsewhere in your application package: employer's name, starting and end dates (Mo/Yr), hours per week, and pay plan, series and grade level (e.g. GS-0201-09) for relevant federal experience.TIP: A good way to ensure you include all essential information is to use the Resume Builder in USAJOBS to create your resume.<br /><br /><b>Are you applying for a promotion? </b>If you are a current GS employee applying for a higher grade than the grade that you currently hold you must provide an SF-50 that shows that you have held the next lower grade for at least one year. Some SF-50s effective within the last 52 weeks will not demonstrate you have held the next lower grade for at least one year (e.g. General Adjustment SF-50 from this year). In many cases, we need to see two (2) SF-50s to determine time-in-grade and eligibility for promotion. If you are a DoD employee, you can obtain a copy of your SF- 50(s) from MyBiz .<br /><br /><b>Are you claiming membership in any professional organizations, or possession of a license, certificate or credentials? </b>Check the <b>Conditions of Employment </b>section above to see if any are required. If you claim membership, license, certification, or credentials, you must submit a copy of said document in your application package. <br /><br /><b>Are you using education as a substitute for some or all of the experience requirement? Is there a basic education requirement for this position?</b> Check the <b>Education </b>section above to see what is allowed and what is required. Any claims you make in your resume or assessment questionnaire regarding education or degrees must be supported by unofficial transcripts or a list of courses, grades earned, completion dates, and quarter and semester hours earned issued from your school. You may submit a copy your degree(s) if specific coursework does not have to be verified. Claims for approved "grandfather" clauses must be fully supported with documentation.<br /><br />If you are selected, we will request official/sealed transcripts directly from the school(s). All education and degrees claimed by you in your application package will be verified before you can report for work. <br /><br /><b>Are you a veteran claiming 5-point veterans' preference</b> or <b>claiming sole survivorship preference? </b>You must submit a copy of your latest DD-214 Certificate of Release or Discharge from Active Duty (any copy that shows all dates of service, as well as character of service [Honorable, General, etc.] is acceptable) OR a VA letter that shows dates of service or service connected disability AND character of service. If you have more than one DD-214 for multiple periods of active duty service, submit a copy for each period of service. If you were issued a DD-215 to amend aforementioned information on the DD-214 you must submit that too. If you are not sure of your preference eligibility, visit the Department of Labor's website: Veterans' Preference Advisor <br /><br /><b>Are you a disabled veteran or claiming 10-point veterans' preference?</b><br /> If you are eligible to claim 10 point veterans preference you must submit a DD-214 Certificate of Release or Discharge from Active Duty as described above for 5-point preference.<br /><br />You must also provide the applicable supporting documentation of your disability (e.g. disability letter from the VA) as described on Standard Form-15 (SF-15). http: www.opm.gov/forms/pdf_fill/SF15.pdf .<br /><br /><b>Are you an active duty service member?</b> Active Duty Service Members are required to submit a statement of service printed on command letterhead and signed by the command. The statement of service must provide the branch of service, rate/rank, all dates of service, the expected date of discharge and anticipated character of service (Honorable, General, etc.).<br /><br />Documents submitted as part of the application package, to include supplemental documents, may be shared beyond the Human Resources Office. Some supplemental documents contain personal information such as SSN and DOB and some documents such as military orders and marriage certificates may contain personal information for someone other than you. You may sanitize these documents to remove said personal information before you submit your application. You must provide an un-sanitized version of the documents if you are selected. <br /><br /><b>If you are relying on your education to meet qualification requirements:</b><br /><br />Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education . <br /><br />Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.